MOUNTING
Mounting onto the Weaver rail with 7/8”
Weaver Mount
1) Mount the 7/8” Weaver Mount onto the body of
PS-22 with 2 screws M4x7 from set.
2) Unscrew the protective back cap from PS-22.
3) Screw the Light Screen into the thread in back
side of unit.
4) Slightly loosen the fixing screws of mount.
5) Place the PS-22 on the weaver rail of the fire
arm before objective of daytime scope on the
minimal distance from it. The optical axes of PS-
22 and daytime scope must have divergence not
more than 3mm. High of optical axe of the PS-22
under weaver rail is 40mm with standard mount
and corresponded ATN 3.5x26 scope.
6) Tighten the fixing screws.
NOTE: Fixing screws may need to be tightened
after continuous shooting.
Mounting onto the Weaver rail with A.R.M.S.
Mount
1) Mount the Adapter onto the body of PS-22 with
2 screws M4x7 from set.
2) Mount the PS-22 with Adapter onto the
A.R.M.S.#10 or A.R.M.S.#19 ACOG with 2
screws M5x8.
3) Unscrew the protective back cap from PS-22.
4) Screw the Light Screen into the thread in back
side of unit.
5) Slightly loosen the fixing screws or levers of
mount.
6) Place the PS-22 on the weaver rail of the fire
arm before objective of daytime scope on the
minimal distance from it. The optical axes of PS-
22 and daytime scope must have divergence not
more than 3mm. High of optical axe of the PS-22
under weaver rail is 49mm with A.R.M.S.#19
ACOG.
7) Tighten the fixing screws or levers of mount.
NOTE: Fixing screws may need to be tightened
after continuous shooting.
Mounting onto the objective of the day scope
with Optional Ring Adapters
1) Unscrew the protective back cap from PS-22.
2) Screw the Ring Adapter into the thread in back
side of unit.
3) Slightly loosen the fixing screws of Ring
Adapter.
4) Put the Insert into the Adapter
Comments to this Manuals